Superb lydkvalitet, og dynamisk ekspressiv kraft er ting som Yamaha, som produsent av musikkinstrumenter, alltid har strebet etter.
S2100-serien gir gjennom høykvalitets Hi-Fi-komponenter en rik musikalitet til lyttegleden. En lett, åpen lyd hvor hver lille lyd når lytteren. Ekspressiv kraft som formidler de mest subtile nyansene som artisten pøser inn i musikken. En realistisk følelse av at du står rett foran utøveren. Dette er målene og den ledende filosofien bak lyden og den sofistikerte teknologien som er arvet fra flaggskipet S3000-serien.
- Floating and Balanced Power Amplifier with MOSFETs
- All-stage fully discrete construction, balanced transmission and low impedance design
- Superior quality electronic volume control for optimum sound
- Large capacity power supply unit delivers energetic, dynamic sound with fast response
- Symmetrical design in pursuit of ideal stereo reproduction
- Discretely configured phono amp
- Headphone amp with fully discrete configuration
- Level meters visually reflect the dynamics in the music
- Elegant design with luxurious real wood panels
- Original speaker terminals combine ease of use and beauty with high sound quality
Informasjon fra produsent.
Floating and Balanced Power Amplifier with MOSFETs
The basic design of the power amplifier circuit adopts Yamaha’s own, uniquely developed Floating and Balanced Power Amplifier technology. Adopting output elements with the same polarity on the plus and minus sides of the output stage, and also completely separating the NFB (Negative Feedback) circuit and power supply into total of four plus and minus sides of the left and right channels, results in thoroughly symmetric push-pull operation of the output stage, Completely floating the entire power amplifier circuit from the ground removes any negative impact of minute voltage fluctuations or ground noise. Moreover, the output elements are comprised of MOSFETs, which provide a warm and natural sonic character. The use of MOSFETs, which have the same polarity on the plus and minus sides, further evolves the ideal of a complete symmetrical design, to eliminate sound quality variations due to difference in polarity—a major distinguishing characteristic of the Floating and Balanced Power Amplifier—resulting in sound with a superior signal-tonoise ratio and superbly well-defined sound field.
All-stage fully discrete construction, balanced transmission and low impedance design
The A-S2100 has achieved a fully discrete configuration during tone defeat, by thoroughly separating the tone control circuit from the signal system. This not only increases response but also improves slew-rate, and results in high range reproduction of greater vitality, richness and smoothness. Signal transmission and amplification features fully balanced transmission for thoroughly balanced operation, even of the control system circuitry. Signal loss through transmission has been significantly reduced, with the application of screw clamp connections and thick cables in connecting the pre amp unit with the power amp unit, which is vital for signal transmission, and in connecting the power step to the speaker terminals. This improves the damping factor and improves driver capacity and damping power of the speaker, resulting in vibrant and powerful bass reproduction.
We’ve utilised a high-quality digital volume control specially designed by New Japan Radio Co., Ltd., which consists only of adder-type resistance, removing the impact of slew-rate decline or colouring of the sound, delivering higher purity in the sound, and excellent, fast response to large volume changes and steep transients. Moreover, the tone controls employ a triple-parallel method, minimising the detrimental impact on sound quality seen with straight-line tone controls. In addition, the bass, treble, and common circuits each utilise simple construction in which the NFB of the amp is not used and the CR elements are simply fixed in a straight line, ensuring exceptionally pure sound reproduction even when tone control is applied and superb response to audio signal transients. When tone defeat is applied, straight signal flow from only one volume circuit to a discrete configuration buffer amp is realised.
Large capacity power supply unit delivers energetic, dynamic sound with fast response
The A-S2100 employs an original EI transformer, carefully customised for optimum compatibility with the chassis. Combining four large capacity carbon sheath block capacitors delivers an energetic sound—even during high volume—that is possible only with the A-S2100. Moreover, since the control amp and control system is equipped with twelve shunt type local regulators that prevent deterioration caused by currency fluctuation, a clean and stable power supply is achieved. The EI transformer is mounted on the chassis using brass washer, restricting internal vibration that would result in noise.
Symmetrical design in pursuit of ideal stereo reproduction
The left-right symmetrical construction with the power supply in the centre and the power amp blocks on the ends achieves greater separation of the left and right channels—necessary for proper two-channel stereo reproduction—and ideal weight balance. Including fine tuning by a centre frame which extends from the front to the back of the casing, the A-S2100 has superb mechanical rigidity and installation stability that dramatically lessens the impact of external vibrations on sound quality.
Headphone amp with fully discrete configuration
The headphone amp also is equipped with fully discrete configuration, for preeminent drivability and damping properties. Included as well is a specialised level trimmer that responds to various load impedances. The superior quality sound that only the A-S2100 can attain is yours to enjoy, even when listening on headphones.
De elegante meterne gir et visuelt uttrykk for musikken og er opplyst fra innsiden med et mykt og varmt LED-lys. De kan konfigureres etter smak og kan f.eks. vise peak.
Originale høyttalerterminaler er laget av ren messing og designet for å lage en sikker tilkobling som ikke reduserer lydkvaliteten. De er kompatible for bruk med bananplugger.
* Banana-plug compatible speaker terminals are available in some regions.
Insulators allow use of spikes or pads
The insulators are crucial parts that block outside vibrations. They adopt Yamaha’s original metal legs in order to maximise vibration control performance. The user can select point installation by applying the supplied spikes or plane insulation with the supplied pads, and use these combined with an interlocking rack if desired.
Fjernkontrollen i samme lukuriøse utseende, kan også brukes for å stye CD-S2100.
A-S2100 CD Player Maks Effekt (4 ohms, 1kHz, 0.7% THD, Maks) 160 W + 160 W Høy Dynamisk Effekt/Kanal (8/6/4/2 ohms) 105/135/190/220 W Demping Faktor 250 Frekvensgang 5 Hz-100 kHz (+0 dB/-3 dB) Signal/Støy Forhold (CD) 103 dB (S: 200 mV) Inngang Følsomhet (CD) 200mV/47k ohms Mål (B x H x D) 435 x 157 x 463 mm; 17-1/8” x 6-1/8” x 18-1/4” Vekt 23.4 kg; 51.6 lbs. Specifications RIAA Equalization Deviation 20 Hz-20 kHz +/-0.5 dB Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz) 0.025%
Størrelse og vekt
Bredde 43.5 cm Høyde 15.7 cm Dybde 46.3 cm Vekt 23.4 kg